Technical Specifications
| Gross Power | 253.5 kW |
| Max Power | 305.0 kW |
| Rated RPM | 540@1800 |
| Type | closed center pressure-flow compensating (PFC) |
| Valves | 4 to 5 |
| Pump Flow | 166.5 lpm |
| Rear Lift | 7212 kg |
| PTO Power | 216.3 kW |
| Pto Tested | 250.7 kW |
| Rear PTO | independent |
| PTO Type | 1000 (1.75) |
| Front Pto | independentOptOptional |
| Front Pto Type | 1000 (1.375) |
| Cvt Fuel Tank | 617.0 L |
| Fps Fuel Tank | 677.5 L |
| Fps Wheelbase | 345 cm |
| Cvt Wheelbase | 350 cm |
| Weight | 10279 kg |
| Front Tyres | 420/85R34 |
| Rear Tyres | 480/80R50 |
| Ground | negative |
| Charging System | alternator |
| Charging Amps | 200 |
| Batteries | 2 |
| Battery Volts | 12 |
| Manufacturer | New Holland (a part of CNH) |
| T8410 | wheeled tractor |
| T8410 Smarttrax | half-track |
| Magnum 340 | similar CaseIH model |
| Exhaust Fluid Def | 98.4 L |
| Final Drives | inboard planetary |
| Rear Type | III/IIIN |
| Control | electronic lower-link draft sensing |
| Drawbar | Cat. 4 |
Used New Holland T8 410 for sale
No listings currently available. Check directly on Mascus.com.au or Trade Farm Machinery for current listings.
Frequently Asked Questions
Yes, with 345 hp this tractor is well suited to broadacre grain farming across Australia.
The hydraulic lift capacity of the New Holland T8 410 is see technical data sheet. This is important for operating heavy front loaders and rear-mounted implements.
The New Holland T8 410 produces 345 hp.
This model is fitted with a mechanical transmission. This transmission type is well proven across Australian farming conditions.
This model is particularly well suited to deep ripping and large-scale seeding with air seeder. New Holland is a popular choice for Australian hay and mixed farmers, offering a wide range of equipment suited to local conditions.
The New Holland T8 410 has an operating weight of approximately see technical data sheet. This weight provides good stability when working on slopes and with implements.
About New Holland T8 410
The New Holland T8 410 has established itself as a reliable performer on Australian broadacre farms, particularly suited to broadacre and enterprise-scale farming operations. In Australia, this model is particularly popular in large-scale cropping in New South Wales and large cotton and grain operations in Queensland. With 345 hp, it is well suited to deep ripping, large-scale seeding with air seeder and GPS-guided precision farming. In Australia, CNH Industrial Australia provides sales, service and parts support through an extensive national dealership network. CNH Industrial Australia ensures service and spare parts availability for this model across Australia.
Find used New Holland on: