Technical Specifications
| Hydraulic System | 172.2 L |
| Type | closed center pressure flow compensated (PFC) |
| Capacity | 172.2 L |
| Pressure | 158.6 bar |
| Valves | 2 to 4 |
| SCV Flow | 83.3 lpm |
| Total Flow | 109.8 lpm |
| Rear Lift | 3492 kg |
| PTO Power | 96.9 kW |
| Drawbar Tested | 87.1 kW |
| Pto Tested | 98.7 kW |
| Rear PTO | independent |
| Clutch | electro-hydraulic wet disc |
| PTO Type | 540/1000 (dual-shaft 1.375) |
| Wheelbase | 300 cm |
| Weight | 15215 to 16590 pounds |
| Front Tyres | 11.00-16 |
| Rear Tyres | 18.4R-38 |
| Ground | negative |
| Charging System | alternator |
| Charging Amps | 110 |
| Charging Volts | 12 |
| Batteries | 2 |
| Battery Cca | 950 |
| Battery Volts | 12 |
| Manufacturer | CaseIH |
| Differential Lock | electric rear |
| Fuel | 295.2 L |
| Rear Type | III/IIIN |
| Control | electronic lower-link draft sensing |
Used Case IH 7210 for sale
No listings currently available. Check directly on Mascus.com.au or Trade Farm Machinery for current listings.
Frequently Asked Questions
The Case IH 7210 has an operating weight of approximately see technical data sheet. This weight provides good stability when working on slopes and with implements.
Used Case IH 7210 tractors can be found on Mascus.com.au, Trade Farm Machinery, Farm Tender and through CNH Industrial Australia dealers around Australia.
The model is especially popular in grain farming on the Eyre Peninsula, the wheat belt of Western Australia. Case IH, in its distinctive red livery, has a major following in Australia's grain belt, particularly in South Australia and Western Australia.
Yes, with 132 hp this tractor is well suited to broadacre grain farming across Australia.
The hydraulic lift capacity of the Case IH 7210 is see technical data sheet. This is important for operating heavy front loaders and rear-mounted implements.
The Case IH 7210 produces 132 hp.
About Case IH 7210
On the vast grain farms of the Riverina of New South Wales, the Case IH 7210 is valued for its 132 output and proven dependability. In Australia, this model is particularly popular in the Riverina of New South Wales and the wheat belt of Western Australia. With 132 hp, it is well suited to primary tillage, seeding operations and spray application. In Australia, CNH Industrial Australia provides sales, service and parts support through an extensive national dealership network. CNH Industrial Australia ensures service and spare parts availability for this model across Australia.
Find used Case IH on: